3M-Matic S867II Dual L-Clip Applicator with Table Stand

Description

The 3M-Matic S867II Dual L-Clip Applicator with Table Stand is a consistent, durable solution to sealing non-RSC cases. The S867II is a bump-style L-clip machine, in which a case is inserted into the nest, the product paddle is depressed, and the air operating mechanism is activated. This mechanism applies 2 4.5” L-clips to the same box edge, as close as 8” apart. The S867II is designed to handle non-regularly slotted cases, such as five panel folds, full overlap, telescoping, and tuck fold. This machine is most properly suited for installation adjacent to a conveyor system or on a stand for off-line systems. Overall, the 3M-Matic S867II Dual L-Clip Applicator with Table Stand promotes efficient tape use with its consistent 4.5” taping, and increases productivity with its dual heads.

Features

• Bump-style dual L-clip sealer for non-RSC cases
• Applies 2 4.5” L-clips of tape
• Applies clips 8”-31” apart
• No adjustment for box sizes required
• Uses filament reinforced tape and transparent reinforced strapping tape
• Supports 12mm-36mm wide tape
• Pneumatic system with no electrical requirements
• Attaches up to 100 L-clips per minute
• Conveniently located air shut-off
• Roller-ball table for easy box positioning
• Minimum box size of 2.25” L x 13” W x 2.25” H
• Maximum box size dependent only on operator handling

Additional information

• 3M S867II Brochure
  140.24 KB
• 3M S867II Owner's Manual
  2.39 MB